Matterhorn Klondike 10" Met Guard Steel Toe Insulated Work Boot
$387.99
Black
style CV1200016438
Color:
Black
Width:
Size:
Select Size and Width for Availability
The link to Matterhorn Klondike 10" Met Guard Steel Toe Insulated Work Boot has been copied
Built for warmth and protection, this men’s 10” puncture-resisting waterproof insulated internal metguard boot is union-made in our Pennsylvania factory.
Featuring 200 grams of Thinsulate™ insulation, it's fortified with a steel safety toe cap, a non-metallic puncture-resisting insole and our abrasion-resisting TigerTip® toe. High-visibility reflective strips provide added safety. This style is proudly Made in the USA with global parts.
Details
Black Full Grain Leather Upper
Matterhorn TigerTip®
GORE-TEX® Breathable waterproof Membrane
D3O™ Non-Metallic Internal Metguard
200 Grams of Thinsulate™ Insulation
Cambrelle® Breathable Moisture Wicking Lining
High-Visibility Reflective Strips
Electrical Hazard Rated
External Ankle Support
Limited Distribution
Non-Metallic Puncture Resisting Insole
Removable Polyurethane Insert
Steel Shank
Goodyear Welt Construction
Vibram® 1275 Olympia Rubber Outsole
USA Made from Fine Components Sourced Worldwide
Electrical Hazard - Footwear tested by an independent lab that can withstand applications of 18,000 volts at 60hz for one minute without leakage.
Insulated - Footwear that provides varying levels of protection against the cold depending on the amount of insulating fabric used.
Puncture Resisting - Meets all current ANSI requirements for safety toe standards, Class 75.
Slip Resisting - Soles designed and constructed with materials to meet the standard for slip resistance.
Steel Shank - A thin piece of metal built between the insole and outsole of the boot that helps provide stability, structure and support.
3M Thinsulate™ - Thinsulate™ uses microfibers that trap dead air but do not absorb water, helping to keep feet warm even in damp conditions. Thinsulate™ is a trademark of 3M.
D3O® Met Guard - The D3O ® featured in Carolina boots are engineered for advanced foot protection against impacts, while remaining soft and flexible for all day comfort in extreme conditions. When integrated into a boot correctly, D3O® Metguards pass both EN and ASTM industry metatarsal protection standards.
Matterhorn TigerTip® - A high-abrasion boot tip provides superior protection and extends the life of the boot.
Vibram® - The Vibram® brand is recognized for its high performance soling products used in rugged, outdoor and service footwear. VIBRAM® and the Yellow Octagonal Label are registered trademarks of Vibram®S.p.A. of Italy. Quabaug Corporation, North Brookfield, MA, is the North American manufacturer of Vibram®soling products under exclusive license.
Made in the USA with Global Parts - Footwear manufactured in our Martinsburg, PA facility.
Steel Toe - Footwear that meets or exceeds the ASTM Standards for compression and impact testing rating of ASTM F2413-18
Union Made - Made with pride by the United Food and Commercial Workers Local 1776 Keystone State in our Martinsburg, Pennsylvania factory.
Built for warmth and protection, this men’s 10” puncture-resisting waterproof insulated internal metguard boot is union-made in our Pennsylvania factory.
Featuring 200 grams of Thinsulate™ insulation, it's fortified with a steel safety toe cap, a non-metallic puncture-resisting insole and our abrasion-resisting TigerTip® toe. High-visibility reflective strips provide added safety. This style is proudly Made in the USA with global parts.
Details
Black Full Grain Leather Upper
Matterhorn TigerTip®
GORE-TEX® Breathable waterproof Membrane
D3O™ Non-Metallic Internal Metguard
200 Grams of Thinsulate™ Insulation
Cambrelle® Breathable Moisture Wicking Lining
High-Visibility Reflective Strips
Electrical Hazard Rated
External Ankle Support
Limited Distribution
Non-Metallic Puncture Resisting Insole
Removable Polyurethane Insert
Steel Shank
Goodyear Welt Construction
Vibram® 1275 Olympia Rubber Outsole
USA Made from Fine Components Sourced Worldwide
Electrical Hazard - Footwear tested by an independent lab that can withstand applications of 18,000 volts at 60hz for one minute without leakage.
Insulated - Footwear that provides varying levels of protection against the cold depending on the amount of insulating fabric used.
Puncture Resisting - Meets all current ANSI requirements for safety toe standards, Class 75.
Slip Resisting - Soles designed and constructed with materials to meet the standard for slip resistance.
Steel Shank - A thin piece of metal built between the insole and outsole of the boot that helps provide stability, structure and support.
3M Thinsulate™ - Thinsulate™ uses microfibers that trap dead air but do not absorb water, helping to keep feet warm even in damp conditions. Thinsulate™ is a trademark of 3M.
D3O® Met Guard - The D3O ® featured in Carolina boots are engineered for advanced foot protection against impacts, while remaining soft and flexible for all day comfort in extreme conditions. When integrated into a boot correctly, D3O® Metguards pass both EN and ASTM industry metatarsal protection standards.
Matterhorn TigerTip® - A high-abrasion boot tip provides superior protection and extends the life of the boot.
Vibram® - The Vibram® brand is recognized for its high performance soling products used in rugged, outdoor and service footwear. VIBRAM® and the Yellow Octagonal Label are registered trademarks of Vibram®S.p.A. of Italy. Quabaug Corporation, North Brookfield, MA, is the North American manufacturer of Vibram®soling products under exclusive license.
Made in the USA with Global Parts - Footwear manufactured in our Martinsburg, PA facility.
Steel Toe - Footwear that meets or exceeds the ASTM Standards for compression and impact testing rating of ASTM F2413-18
Union Made - Made with pride by the United Food and Commercial Workers Local 1776 Keystone State in our Martinsburg, Pennsylvania factory.