Insulated Circuit Comp Toe
$129.99
Color:
Dark Brown (Brown)
Width:
Size:
Men's Sizes & Widths
| US | EURO |
|---|---|
| 6 | 39.5 |
| 6.5 | 40 |
| 7 | 40.5 |
| 7.5 | 41 |
| 8 | 41.5 |
| 8.5 | 42 |
| 9 | 43 |
| 9.5 | 43.5 |
| 10 | 44 |
| 10.5 | 45 |
| 11 | 45.5 |
| 11.5 | 46 |
| 12 | 47 |
| 12.5 | 47.5 |
| 13 | 48 |
| 13.5 | 48.5 |
| 14 | 49 |
| 14.5 | 49.5 |
| 15 | 50 |
| 16 | 51 |
| B = Narrow |
| D = Medium |
| R = Medium |
| M = Medium |
| W = Wide |
| E = Wide |
| 2E = Wide |
| 3E = Double Wide |
| 4E = Extra Wide |
This men's 6" waterproof insulated composite toe work boot works as hard as you do.
It features our waterproof SCUBALINER™, 400 grams of Thinsulate™ insulation and a composite safety toe cap that team up to help your feet stay dry, warm and protected.
Details
- Bandit Nutcase Leather Upper
- Composite Safety Toe Cap
- Mesh Lining
- 400 Grams of Thinsulate™ Insulation
- Removable EVA Footbed
- Electrical Hazard Rated
- Non-Metallic Shank
- Cement Construction
- Oil & Slip Resisting Rubber Outsole
Electrical Hazard - Footwear tested by an independent lab that can withstand applications of 18,000 volts at 60hz for one minute without leakage.
Insulated - Footwear that provides varying levels of protection against the cold depending on the amount of insulating fabric used.
Non-Metallic Shank - A composite alternative to a steel shank, with the stability, structure and support you need. Ideal for worksites with metal detectors at access points so you can work without repeatedly setting off the metal detector.
Slip Resisting - Soles designed and constructed with materials to meet the standard for slip resistance.
Waterproof - Carolina’s Exclusive Proprietary Waterproof Lining System.
3M Thinsulate™ - Thinsulate™ uses microfibers that trap dead air but do not absorb water, helping to keep feet warm even in damp conditions. Thinsulate™ is a trademark of 3M.
Waterproof Scubaliner™ - Carolina’s Exclusive Proprietary Waterproof Lining System
Composite Toe - A Non-Metallic Safety Toe for environments where steel is not appropriate. Reduced cold-transfer in cooler environments and meets the ASTM Standards for compression and impact testing rating of ASTM F2413-18.